Description:
Wagging Tails Leash Hanger
Dimensions:
10" long
Wood:
one 2X4 x 36" long pine board
one 12" x 12" x 1/4" thick piece of plywood
one 6" x 9 3/8" x 5/32" thick piece of plywood
Hardware:
four #6 x 1 1/4" long screws
two sawtooth hangers (#SAWH)
Tools:
band saw with a smooth cutting non-chipping, scrolling blade
screwdriver
drill and 5/32" and 5/64" dia. drill bits
Supplies:
Transfer paper, pencil & clear tape (#CARB)
sand paper-medium & fine grits
wood filler-non shrinking, fast drying for wood flaws
paint brushes-2", 3/4" & 1/4" wide brushes and a fine tipped detail brush
wood glue-interior
Paint:
white water base primer for a base coat (#PRIMQT)
P2030-burnt sienna
P2057-quaker grey
P2063-spice tan
P2090-hippo grey
P2098-tomato spice
P2505-white
P2506-black
Sealer:
high-grade, non-yellowing, semi-gloss UV protected project sealer for indoor protection (#INDRQT)