About 10" wide x 18" tall
One - 1X2 x 12" long board, #2 or better grade pine
Two - 12" x 16" x 1/4" thick pieces of Finnish plywood (#FPLY4)
Hand held sabre saw (jig saw), table saw, band saw or scroll saw with a smooth cutting non-chipping blade, drill, 1/4" and 1/16" dia. drill bits.
Washer - Two 1/4" dia. I.D.
Wind Chime Bell - Two 4" plated steel (#BELL1).
Plastic Eyes - Four 12mm yellow (#PE102).
Fishing Line - 25 lb. test, approximately two 36" lengths.
Pattern transfer paper (#CARB), pencil & clear tape.
Sand paper - medium & fine grits.
Wood filler - non shrinking, fast drying for wood flaws.
Paint brushes - 2", 3/4", 1/4" and fine tip detail brushes.
Wood glue-exterior (#GLUETB3).
White water base primer (#PRIMQT) for a base coat and the
following suggested colors of Delta Craft paint:
High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection