Velociraptor Woodcraft Pattern

WOOD:
One 4' x 8' sheet of Plywood (3/4" thick exterior grade, good one or two sides, preferably 5-ply for better stability).

PARTS/HARDWARE: Required for displaying.
Stakes - Two 3/8" dia. x 18" long, fiberglass (2 - #YS18).
Four 3/16" dia. x 11" long, Steel (4 - #YS11).
Clamps - Four 3/8" w/screws (1 pack - #YSC2).
Eight 3/16" w/screws (1 pack - #YSC1).

TOOLS:
Hand held jigsaw (sabre saw) with a non-chipping, scrolling blade.

SUPPLIES:
Transfer paper (#CARB), pencil & clear tape.
Sand paper - medium & fine grits.
Paint brushes - 2" wide brush.

PAINT:
Water based primer (#PRIMQT) for a base coat and the following suggested colors of acrylic paint or exterior semigloss enamel: Black (#2506).

SEALER (optional):
High-grade, non yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.