Customer Service: 800.946.3435

Hang this unique project from a tree limb using wire and an eye screw or mount on a fence or tree trunk using our Flush Mount Hangers (available below). The bottom is hinged for easy clean out when nesting season is over.
This fun project is easy to make from our full-size pattern and step-by-step instructions. Uses two brass plated hinges (#BHNG1) available below. (16" tall)
Wood:
One 1X12 x 84" long pine board.
One 2X4 x 4-7/8" long pine board.
Tools:
Table saw or circular saw and band saw or scroll saw with a smooth non-chipping blade, drill and 1-1/2", 3/16" and 3/32" dia. drill bits.
Hardware:
Nails - One box, 3D 1-1/4" long, finish.
Hinge - Two 1" x 1-1/16" brass plated (1 pack #BHNG1).
Eyescrew (optional) - One 5/16" I.D. (#EYE3).
Flush Mount Hanger (optional) - One 1-3/4" x 1-1/2" (#FMH).
Screw - Ni ne #8 x 1-1/2" long, flat head.
Supplies:
Transfer paper (#CARB), pencil & clear tape.
Sand paper - medium & fine grits.
Wood Glue - exterior (#GLUETB3).
Wood filler - non shrinking, fast drying for wood flaws.
Paint brushes - 2", 1" and fine detail.
Paint:
White water base primer (#PRIMQT) for a base coat and the following suggested colors of Delta Craft paint:
2015 - Purple
2030 - Burnt Sienna
2076 - Crimson
2471 - Hunter Green
2483 - Azure Blue
2505 - White
2506 - Black
2459 - Crocus Yellow
Sealer:
High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.
Like building it. Great instructions
Loved your plans.
I don't normally buy plans, but now I may consider purchasing more from your company in the future. The only thing I stumbled on was: "Straw" was listed as a color for a few parts, but was not on the list at the bottom of the plans. After some research, I figured out , you don't supply that color anymore - a substitute was given. A head's up (on my plans or a note in my envelope) would have been nice. I still give you 5 stars!
Merci de vous être abonné !
Cet email a été enregistré !