Patriotic Pine Trees Pattern

It's easy to make this pair of stylish pines....just trace our full-size patterns onto a single sheet of plywood using pattern transfer paper, cut out with a hand held jigsaw and paint. All internal lines and paint colors are included that make this project as simple as paint-by-number. (up to 62" tall)

More Info

Dimensions:
Large Tree - 61-3/4" tall x 34-1/4" wide
Small Tree - 48-1/4" tall x 30-1/4" wide

Wood:
One 48" x 60" piece of 3/4" thick exterior grade plywood, good one or two sides , preferably 5-ply for better stability.

Tools:
Hand held jigsaw (sabre saw) with a non-chipping, scrolling blade and screwdriver

Hardware: Required for displaying
Stakes - Four 3/8" dia. x 18" long fiberglass rods (4 - #YS18)
Clamps - Eight 3/8" dia. (1 pack #YSC2)

Supplies:
Transfer paper (#CARB), pencil & clear tape
Sand paper ?Çô medium & fine grits
Wood filler ?Çô non-shrinking, fast drying for wood flaws
Paint Brushes ?Çô 3/4", 1/4" and 2" wide brushes or foam tip

Paints:
White primer (#PRIMQT) for a base coat and the following suggested colors of acrylic paint or exterior semi-gloss enamel:
2049 Spice Brown
2051 Copen Blue
2076 Crimson
2505 White

Sealer:
High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.