GIGANTIC Easter Bunny Premium Woodcraft Pattern

Our GIGANTIC Bunny project is sure to get attention when you display it in your yard this Easter!

Don't let the size intimidate you though---this project is actually quite easy to make. The entire display shown can be cut from just a single sheet of plywood using a hand-held jigsaw.

And you'll get started quickly because our Premium 4'x8' pattern has every full-size piece precisely laid out, ready to trace. Of course, step-by-step instructions are always included to ensure your success.

Display measures over 10' tall (122")!

More Info

Dimensions:
122" tall

WOOD:
One 4x8 x 3/4" thick sheet of exterior plywood (sanded 2 sides)
Optional Plywood Base - One 30" x 40" x 3/4" thick piece
Optional Closure Plate - One 4" x 8" x 3/4" thick plate

TOOLS:
Hand held jigsaw (sabre saw) with a non-chipping, scrolling blade, drill and 3/16" and 3/8" dia bits, hack saw, large hammer, two pipe wrenches and screwwdriver.
(1-3/8" dia. drill bit also needed if using optional base.

HARDWARE:
Black Steel Pipe - 1" I.D. x 10" long, threaded ends
Coupling Fitting - One 1", black malleable iron.
Screws - Twenty three #8 x 1-1/2" long
Eight #12 x 3/4" long pan head

SUPPLIES:
Transfer paper (#CARB), pencil & clear tape.
Sand paper - medium & fine grits.
Wood Glue - exterior (#GLUETB3) Wood filler - non shrinking, fast drying for wood flaws.
Paint brushes - 2", 1" and fine detail.

PAINT:
White water base primer (#PRIMQT) for a base coat and the following suggested colors of Delta Craft paint:
2002-Antique Gold
2037-Blue Heaven
2038-Ultra Blue
2084-Lisa Pink
2091-G.P. Purple
2449-Hydrangea Pink
2451-Tropic Bay
2459-Crocus Yellow
2477-Denim
2505-White
2506-Black

SEALER: High-Grade, Non-Yellowing, Semi-Gloss, UV Protected Project Sealer (#POLYQT) for Exterior use.