Chickadee/Wren House Trio Wood Pattern

Invite beloved songbirds to nest in your backyard with this trio of very attractive birdhouses. All feature hinged floors, lap-look siding & cedar shake or copper roofs. Pattern for all 3 (up to 15" tall)

More Info

DIMENSION:
A-Frame Birdhouse ?Çô Approx. 14" x 8" (at widest part of roof)
Split-Roof Birdhouse ?Çô Approx. 10" x 6" (at the base)
Rounded-Roof Birdhouse ?Çô Approx. 11" x 6" (at base)

WOOD:
Two 12" x 12" sheet of 1/8" thick plywood (#FPLY812)
One 36" x36" sheet of 1/2" thick plywood, exterior grade, good one or two sides preferably 5 ply better stability
One 1X4 x 18" long board, #2 or better grade pine
One 1X3 x 36" long cedar board

Saw:
Scroll saw or hand held sabre saw with a smooth cutting non-chipping, scrolling blade
Table Saw or Circular Saw

SUPPLIES;
COPPER SHEETS NO LONGER AVAILABLE IN OUR CATALOG. CAN BE PURCHASED ON AMAZON

PAINT:
Exterior latex (not oil based) in the following colors:
Dark Grey
Off White

SEALER: (optional)
High-grade, non-yellowing, semi-gloss UV protected project sealer for outdoor protection (#POLYQT). When using exterior paints, the sealer is contained right in the paint and no additional sealer is necessary.