2 Person Picnic Table Woodworking Pattern

Enjoy outdoor dining with a friend on this attractive cedar project that is easily made from our simple to follow full-size pattern. (Dimensions: Table top 35", Seats 11" Deep X 18" Wide)

More Info

Description:
Attractive two person picnic table. Makes a nice weekend project.

Dimensions:
Table top 35"

Wood:
Weather resistant Cedar. If you don't need weather resistant wood for your project use a lower cost #2 grade pine.
Three 2X6 x 10' long board
Four 2X4 x 10' long boards
One 2X6 x 8' long board
One 4X4 x 6' long board

Hardware:  Required for assembly 
Screws 
* One Hundred Sixteen #8 x 2-1/2" long flat head, weather resistant
* Eighty Two #10 x 3" long, flat head weather resistant
* Lag Screw Eight 5/16" dia. x 3" long
* Washer  Eight 1" O.D. x 5/16" I.D.

Tools:
Table saw or circular saw
Drill
Drill bits  3/16", 5/16" and 7/16" dia.

Supplies:
Transfer paper (#CARB2)
Pencil and clear tape
Sand paper Medium and fine grits
Wood Filler Non-shrinking, fast drying for wood flaws 
Paint brushes 3/4" and 1/4" wide brushes
Wood Glue  waterproof, exterior grade

Sealer:
High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.

NOTE: Not recommended to be used by persons weighing in excess of 250 lbs. each.