Barre latérale

Categories

Prix

$
à
$

Parts Kits

Filtre
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • En vedette
  • Meilleures ventes
  • Alphabétique, de A à Z
  • Alphabétique, de Z à A
  • Prix: faible à élevé
  • Prix: élevé à faible
  • Date, de la plus ancienne à la plus récente
  • Date, de la plus récente à la plus ancienne
Trier

Trier par:

  • En vedette
  • Meilleures ventes
  • Alphabétique, de A à Z
  • Alphabétique, de Z à A
  • Prix: faible à élevé
  • Prix: élevé à faible
  • Date, de la plus ancienne à la plus récente
  • Date, de la plus récente à la plus ancienne
  • Whirligig Parts Kit #3 - The Winfield Collection

    Whirligig Parts Kit #3

    This whirligig parts kit is used for pattern #WGC2 The Wild Birds as well as our Flying Carrot Whirligig #CS1053. One kit is needed per figure. [This Kit was developed for our Winfield Collection projects-- instructions for its use are included on the pattern...
    $6.29 USD
    $6.29 USD
  • Whirligig Parts Kit #2 - The Winfield Collection

    Whirligig Parts Kit #2

    Convenient Parts Kit for our pattern #WGC156 Whirligig Collection, #WGC4 Wacky Fun Whirligigs and #W2199 Dragonfly & Bee Whirligigs. One Kit is required for each figure. [This Kit was developed for our Winfield Collection projects--instructions for its use are included on the pattern only.]...
    $6.29 USD
    $6.29 USD
  • Whirligig Parts Kit - SWD [ZZ-H-660] - The Winfield Collection

    Whirligig Parts Kit - SWD [ZZ-H-660]

    This Kit contains the wood and metal parts to complete one whirligig. Includes two wood hubs, the pre-drilled center dowel, washers, screws, brad nails, brass tube sleeves, ball bearing, mounting rod and thin 5/32 Finnish Plywood for four wings.
    $11.99 USD
    $11.99 USD
  • Whirligig Parts Kit #1 - The Winfield Collection

    Whirligig Parts Kit #1

    Convenient Parts Kit to make one Whirligig figure from either pattern #WGC3 (Wild Action Whirligigs) or pattern #WGC8 (Wild Action Whirlgigs #2). [This Kit was developed for our Winfield Collection projects--instructions for its use are included on the pattern only.]
    $13.99 USD
    $13.99 USD
  • Whirling Wing Parts Kit (WGKIT10/WGKIT10B) - The Winfield Collection

    Whirling Wing Parts Kit (WGKIT10/WGKIT10B)

    Save time and money plus get professional-looking results by using our Whirling Wing Parts Kit. Included in this Kit are the hard-to-cut wood center hubs, stainless steel center shaft, brass turn sleeves and washers plus steel mounting rod to make three Whirling Wing Whirligigs...
    $14.99 USD
    $14.99 USD
  • Whirligig Parts Kit - Golfer - The Winfield Collection

    Whirligig Parts Kit - Golfer

    Give your Whiffing Golfer whirligig project (W1167WG) that professional look. This kit includes the wood ball plus all the hard-to-find hardware and the hard-to-cut blade hub to make one design. [This Kit was developed for our Winfield Collection project--instructions for its use are included...
    $14.99 USD
    $14.99 USD
  • Whirligig Parts Kit - Bass - The Winfield Collection

    Whirligig Parts Kit - Bass

    Give your Hungry Bass whirligig project (W1166WG) that professional look. This kit includes all the hard-to-find hardware plus the hard-to-cut blade hub to make one design. [This Kit was developed for our Winfield Collection project--instructions for its use are included on the pattern only.]...
    $14.99 USD
    $14.99 USD
  • Windmill Parts Kit - The Winfield Collection

    Windmill Parts Kit

    Convenient Parts kit for both our Windmill Patterns #MILL and #MILL2. Includes the 6" lazy susan, lag bolt, 2 washers and the special center sleeve. [This Kit was developed for our Winfield Collection projects--instructions for its use are included on the pattern only.] More...
    $7.49 USD
    $7.49 USD
  • Ferris Wheel Parts Kit - The Winfield Collection

    Ferris Wheel Parts Kit

    All the specialty hardware and wood parts to make one Holiday Ferris Wheel in a convenient money-saving kit. Includes two center shaft bearing brackets, four bearing bracket lag screws, twelve 2" diameter wooden balls, two wheel connector steel rods with clamps and screws and...
    $28.99 USD
    $28.99 USD
  • Buckboard Wagon Parts Kit [PL49KIT-1 & PL49KIT-2] - The Winfield Collection

    Buckboard Wagon Parts Kit [PL49KIT-1 & PL49KIT-2]

    This hardware kit includes 2 metal straps with screws, tongue D-ring,D-ring plate with bolts and wheel attachment bolts with washers. The pattern is sold separately. [This Kit is developed for a Winfield Collection project--instructionsfor its use are included on the pattern only.]
    $24.99 USD
    $24.99 USD
  • Whirligig Parts Kit #6 - The Winfield Collection

    Whirligig Parts Kit #6

    Keep your whirligigs turning smoothly in the wind! Enough brass parts to make four whirligigs. [This Kit was developed for our Winfield Collection projects--instructions for its use are included on the pattern only.]
    $6.99 USD
    $6.99 USD
  • Whirligig Parts Kit #4 - The Winfield Collection

    Whirligig Parts Kit #4

    Hardware kit contains enought brass screws and center tubes to make the ten spinning whirligigs in pattern #WGC9, Whirling Flower Whirligigs. [This Kit was developed for our Winfield Collection project--instructions for its use are included on the pattern only.]
    $11.99 USD
    $11.99 USD
  • GINORMAS Reindeer Parts Kit - The Winfield Collection

    GINORMAS Reindeer Parts Kit

    Parts Kit includes the carriage bolts, washers and nuts to fasten the neck of either GINORMAS Reindeer project (#W1448CY-head up or #W1461CY-head down) to the body.More Info
    $2.99 USD
    $2.99 USD
  • Parts Kit for #7368SC Twisters - The Winfield Collection

    Parts Kit for #7368SC Twisters

    Parts to make 3 Twisters.More Info
    $4.95 USD
    $4.95 USD
  • Giant Whirligig Flowers Parts Kit - The Winfield Collection

    Giant Whirligig Flowers Parts Kit

    Save time and money plus get professional-looking results by using our Giant Whirligig Flowers Parts Kit. Included in this Kit are the center sleeves, washers and lag bolts to make three flowers. [This Kit was developed for our Winfield Collection project--instructions for its use...
    $8.99 USD
    $8.99 USD
  • Old Grain Mill Combo Parts Kit #2 [YF6KIT,PMP140,PMPH5 & BTN375] - The Winfield Collection

    Old Grain Mill Combo Parts Kit #2 [YF6KIT,PMP140,PMPH5 & BTN375]

    COST SAVING COMBINATION KIT INCLUDES THE PUMP, HOSE AND HARDWARE KIT: ~Our permanently sealed, maintenance free, magnetic drive submersed pump with a rated flow of 140 gallons of water per hour (Item #PMP140). Pump uses half the electricity of regular pumps and comes with...
    $47.99 USD
    $47.99 USD
  • Teetering Character Parts Kit - The Winfield Collection

    Teetering Character Parts Kit

    Specialty metal and plastic hardware for the jointed legs and spring arms for two interchangeable characters for our motorized Teeter Totter. [This Kit was developed for our Winfield Collection projects--instructions for its use are included on the patterns only.] More Info
    $7.99 USD
    $7.99 USD
  • Christmas Carousel Parts Kit - The Winfield Collection

    Christmas Carousel Parts Kit for W1630

    Convenient Hardware Kit includes all the connecting L brackets, machine screws and nuts, center bushing, lag screw and washers for one carousel #1630 shown below. [Please Note this Kit is developed for our Winfield Collection project--instructions for its use are included on the pattern...
    $26.99 USD
    $26.99 USD
  • Halloween Ferris Wheel Parts Kit - The Winfield Collection

    Halloween Ferris Wheel Parts Kit

    All the specialty hardware to make one Halloween Ferris Wheel in a convenient money-saving kit. Includes center shaft bearings, steel rods, clamps, lag screws and PVC sleeves. [This Kit was developed for our Winfield Collection project--instructions for its use are included on the pattern...
    $9.99 USD
    $9.99 USD
  • Hay Wagon Planter Complete Parts Kit (PL15KIT1 AND PL15KIT2) - The Winfield Collection

    Hay Wagon Planter Complete Parts Kit (PL15KIT1 AND PL15KIT2)

    This complete kit contains all the hardware (screws, bolts, washers & nuts) along with the 12 pre-bent, pre-drilled, ready-to-paint steel pieces to make our little Hay Wagon Planter. Project plan (#PL15) must be purchased separately. [This Kit was developed for our Winfield Collection project--instructions...
    $56.99 USD
    $56.99 USD
  • Mini Wind Generator Parts Kit - The Winfield Collection

    Mini Wind Generator Parts Kit

    Includes the hard-to-cut blade hub along with the steel center shaft & spinning sleeve, stainless steel support rod, brass sleeve & bearing along with two wood half balls. The Blade and Tail Plywood is not included. [This Kit was developed for our Winfield Collection...
    $9.99 USD
    $9.99 USD
  • Weathervane Parts Kit - The Winfield Collection

    Weathervane Parts Kit

    Includes the specialty hardware to make three weathervanes. [This Kit was developed for our Winfield Collection project--instructions for its use are included on the pattern only.]
    $5.99 USD
    $5.99 USD
  • Outdoor Dancing Showman Parts Kit - The Winfield Collection

    Outdoor Dancing Showman Parts Kit

    Convenient Hardware Kit to make our Dancing Snowman #W2125 available below. Includes all the specialty plastic bushings, nuts, washers and screws to make one project. [Please Note that this Kit was developed for a specific Winfield Collection project--instructions for its use are included on...
    $14.99 USD
    $14.99 USD
  • Can Krusher Parts Kit - The Winfield Collection

    Can Krusher Parts Kit

    Parts Kit includes all the bolts, nuts, washers and screws plus a piece of extra strong 3/4" thick plywood to use to cut out the krusher "jaws". Remaining wood and project plans are not included.[This Kit is developed for a Winfield Collection project--instructions for...
    $9.99 USD
    $9.99 USD
  • Chaise Lounge Parts Kit - The Winfield Collection

    Chaise Lounge Parts Kit

    Hardware kit includes the screws, carriage bolts, washers and lock nuts needed to complete one Chaise Lounge Rocker (#YF32). [This Kit is developed for a Winfield Collection project--instructions for its use are included on the pattern only.] More Info
    $11.99 USD
    $11.99 USD
  • Antique Soda Machine Parts Kit - The Winfield Collection

    Antique Soda Machine Parts Kit

    Kit of most of the specialty parts needed for our Antique Soda Machine Project (Plan #W1778). Includes hinges with screws and roller catch for large door, acrylic panels, glazier points and magnetic catch for small display door and working steel bottle opener with screws....
    $49.99 USD
    $49.99 USD
  • Lawn Drink Holders Parts Kit - The Winfield Collection

    Lawn Drink Holders Parts Kit

    Convenient kit includes the 4" long bolt with self-locking nut, 3" long ringed Pin, four flat washers, two 3/8" dia. x 8-7/8" long fiberglass ground stakes, and eight brass plated screws with brass sleeves .More Info
    $9.99 USD
    $9.99 USD
  • 3D Pelican Parts Kit - The Winfield Collection

    3D Pelican Parts Kit

    Convenient kit to complete our 3D Life-size Pelican project. Includes two 18mm Plastic Clear Eyes (#PE144), two lengths of CPVC pipe for the legs and a sheet of 1/4" thick Finnish plywood (#FPLY412) to make the webbed feet. More Info
    $9.99 USD
    $9.99 USD
  • Adirondack Fish Chair Parts Kit - The Winfield Collection

    Adirondack Fish Chair Parts Kit

    Hardware kit includes all of the necessary screws, bolts, nuts, washers and brass sleeves to complete one project. The pattern is not included.[This Kit is developed for a Winfield Collection project--instructions for its use are included on the pattern only.] More InfoKIT CONTAINS: 54-...
    $12.99 USD
    $12.99 USD
  • Civil War Cannon Parts Kit - The Winfield Collection

    Civil War Cannon Parts Kit

    Convenient Parts kit for our Civil War Cannon pattern #YD235 available below. Includes flat head screws, lag screws and washers. .[Please Note this Kit is developed for our Winfield Collection project--instructions for its use are included on the pattern only.] More Info
    $7.99 USD
    $7.99 USD
  • Cedar Rocker Parts Kit - The Winfield Collection

    Cedar Rocker Parts Kit

    Convenient Hardware Kit for our Cedar Rocker Project #1048YF. Includes wood screws and brass sleeves. The pattern is available separately. [This Kit is developed for a Winfield Collection project--instructions for its use are included on the pattern only.] More Info
    $13.99 USD
    $13.99 USD
  • Waving Action Parts Kit - The Winfield Collection

    Waving Action Parts Kit

    Handy Kit used for our waving action projects. Includes the bolt, washers, nut, nylon bushings and the nylon sleeve. [This Kit was developed for our Winfield Collection projects--instructions for its use are included on the pattern only.] More Info
    $2.99 USD
    $2.99 USD
  • Porch Swing Parts Kit (for YF17)

    Porch Swing Parts Kit (for YF17)

    THIS IS A HARDWARE KIT FOR THE PORCH SWING - #YF17.  KIT CONTAINS Galvanized & zinc parts: 21- #6 X 1 1/4" LONG FLAT HEAD SCREWS28- #8 X 2 1/2" LONG FLAT HEAD SCREWS8- #8 X 3" LONG FLAT HEAD SCREWS2- 1 1/4" SHANK,...
    $12.99 USD
    $12.99 USD
  • Old Grain Mill Parts Kit - The Winfield Collection

    Old Grain Mill Parts Kit

    Includes heavy duty zinc plated steel center rod forthe water wheel plus bearing sleeves and washers to make our Old Grain Mill project (#YF6) shown below. [This Kit was developed for our Winfield Collection project--instructions for its use are included on the pattern only.]...
    $5.99 USD
    $5.99 USD
  • 2 X 4 Picnic Table Parts Kit - The Winfield Collection

    2 X 4 Picnic Table Parts Kit

    Includes all the lag bolts, nuts, washers and screws to make one of our 2 x 4 Picnic Tables. The pattern is not included. [This Kit is developed for a Winfield Collection project--instructions for its use are included on the pattern only.]More Info66 -...
    $7.99 USD
    $7.99 USD
  • Early Construction Machine Parts Kit - The Winfield Collection

    Early Construction Machine Parts Kit

    Convenient collection of parts needed to complete our Early Construction Machine Projects #S-8366FS. Kit contains (8) spoked & (8) treaded wheels and axle pegs for the Crane, Grader, Shovel and Dump Truck; 1" wood ball for Crane; & (4) wood buttons for Crane &...
    $23.99 USD
    $23.99 USD
  • Gingerbread Ferris Wheel Parts Kit - The Winfield Collection

    Gingerbread Ferris Wheel Parts Kit

    Includes all the screws, sleeves, lag screw and washers for one spinning Ferris Wheel project. [Please Note this Kit is developed for our Winfield Collection project--instructions for its use are included on the pattern only.] More Info
    $9.99 USD
    $9.99 USD
  • Teeter Totter Specialty Parts Kit - The Winfield Collection

    Teeter Totter Specialty Parts Kit

    Steel support rod, clamps with screws and bearing sleeves to make one basic Teeter Totter unit. [This Kit was developed for our Winfield Collection project--instructions for its use are included on the pattern only.] More Info
    $4.99 USD
    $4.99 USD
  • Crazy Spinner Parts Kit - The Winfield Collection

    Crazy Spinner Parts Kit

    The Parts Kit for our Crazy Spinners includes the center steel shaft, turn sleeves, axle nut, plus shaft clamps with screws to make either Crazy Spinner project shown below..[Please Note this Kit is developed for our Winfield Collection project--instructions for its use are included...
    $13.99 USD
    $13.99 USD
  • Yard Games Scorekeeper Parts Kit - The Winfield Collection

    Yard Games Scorekeeper Parts Kit

    Parts Kit for our Yard Games Scorekeeper Plans #W1506; Heavy-duty draw catch & T-hinge allows wood version to fold smaller for travel or storage; includes screws. [This Kit was developed for our Winfield Collection project--instructions for its use are included on the pattern only.]...
    $9.99 USD
    $9.99 USD
  • Parts Kit for Washer Toss Game - The Winfield Collection

    Parts Kit for Washer Toss Game

    Includes 2 Heavy-Duty draw catches and 4 handle clamps to make 2 boards. (for item #W1456 - Washer Toss Game Plan) WASHERS -- order item #WS25 (set of 8; 4 silver + 4 gold colored 2-1/2" diameter flat washers) [This Kit was developed for...
    $14.29 USD
    $14.29 USD
  • Garden Shed Hardware Parts Kit - The Winfield Collection

    Garden Shed Hardware Parts Kit

    Parts kit for our Garden Shed #YF27 includes all hinges and handles (both with screws) for the shed roof, side window and dutch door. [This Kit was developed for our Winfield Collection project--instructions for its use are included on the pattern only More Info
    $39.99 USD
    $39.99 USD
  • Whirly Wheelz Parts Kit - The Winfield Collection

    Whirly Wheelz Parts Kit

    Includes Washers, Bearings & Screws to make 4 Whirly Wheelz Mobiles! [This Kit was developed for our Winfield Collection projects--instructions for its use are included on the patterns only.]
    $6.49 USD
    $6.49 USD
  • AAC31 CLOCK PARTS KIT - The Winfield Collection

    AAC31 CLOCK PARTS KIT

    Specifically for Guardian Angel Clock scroll saw pattern, this kit includes Face, Hands, Hinges, Movement and Pendulum
    $109.99 USD
    $109.99 USD
  • Doll Coffee and End Table Parts Kit - The Winfield Collection

    Doll Coffee and End Table Parts Kit

    Wood kit includes the birch buttons and birch spindles to make both tables on our pattern #W1465KF available below. [Please Note this Kit was developed for our Winfield Collection project--instructions for its use are included on the pattern only.] More Info
    $9.99 USD
    $9.99 USD
  • Doll Bed Parts Kit - The Winfield Collection

    Doll Bed Parts Kit

    Wood kit includes all the required 6" long turned Spindles, Balls, Wheels and Buttons to complete one Doll Bed #W1443KF shown below.[Please Note: this Kit was developed for our Winfield Collection project--instructions for its use are included on the pattern.] More Info
    $11.99 USD
    $11.99 USD
  • Dancing Tabletop Characters Parts Kit - The Winfield Collection

    Dancing Tabletop Characters Parts Kit

    Includes all the required machine bolts, nuts, washers, screws, nylon sleeves and spacers to make one Tabletop Dancing Santa project. [This Kit was developed for our Winfield Collection project--instructions for its use are included on the pattern only.] More Info
    $8.99 USD
    $8.99 USD
  • Rising Demon Parts Kit - The Winfield Collection

    Rising Demon Parts Kit

    This specialty parts kit includes the wood eyeballs, plastic eyes, eye screws, PVC arm joints, lag screws, nylon bushings, washers, bolts, lock nut and L-brackets with screws to make one scary, over-sized Motorized Rising Demon. Add an eerie, scary red glow to the eyes...
    $9.99 USD
    $9.99 USD
  • Nativity Pavers Parts Kit - The Winfield Collection

    Nativity Pavers Parts Kit

    Includes all the turned wood parts, plastic animal eyes and craft gem stones required to make our Patio Paver Pal Nativity Set. Pattern, Wood to cut parts from, paint, glue and other accessories are not included and must be purchased separately. More Info
    $14.99 USD
    $14.99 USD
  • Outhouse Tool Shed Parts Kit - The Winfield Collection

    Outhouse Tool Shed Parts Kit

    Hardware parts kit for our Outhouse Tool Shed. Includes three heavy duty hinges, lockable hasp, colonial style handle and all the screws. The pattern (#YF26) is available below. [This Kit was developed for our Winfield Collection project--instructions for its use are included on the...
    $22.99 USD
    $22.99 USD