Welcome Door Sign Pattern

Easily made using cost effective Ship Lap Board and both 5/32" & 1/4" thick Plywood. Pattern includes complete instructions from cutting to painting. 16" in diameter.

More Info

Wood:
(1) 8' x 5-1/4" x 9/16" thick Ship Lap Board for Sign Assembly A Pieces
(1) 16" x 16" x 1/4" thick Plywood Board (#FPLY416) for Trim C Pieces
(1) 16" x 16" x 5/32" Plywood Board (#FPLY516) for Backer B.

Hardware, Tools & Supplies:
Scroll Saw Tape (#SST20) -OR- Spray Glue (#GLUE94)
Scroll Saw & Blade(s) of choice; Drill;
Small Sized Drill Bit; Sandpaper in various grits;
Paint or Stain if desired; Titebond III Wood Glue (#GLUETB3)
Gloss Spray Sealer (#SEAL1) -OR- Matte Spray Sealer (#SEAL2) -OR- Indoor Brush-On Polyurethane Sealer (#INDRQT)
#0000 Steel Wool; a 24" long piece of Jute.