Customer Service: 800.946.3435

You'll turn some heads when you display both of these leaning life-size projects in your yard! Easy to make from plywood using just a hand held jigsaw.
You get traceable, full-size patterns plus complete instructions to make both our Leaning Cowboy Shadow (#SH37) and Leaning Cowgirl Shadow (#SH72).
DIMENSIONS:
72" H X 23" W
WOOD:
1/2" OR 3/4" EXTERIOR PLYWOOD
SAW:
HAND HELD SABRE SAW
NOTE: SHOULD BE ABLE TO GET 2 COWBOYS OUT OF 1 SHEET OF 4 X 8 PLYWOOD.
PAINTS:
FLAT EXTERIOR BLACK
SH72 - LEANING COWGIRL:
DIMENSIONS:
68" TALL X APPROXIMATELY 26" WIDE
WOOD:
1/2" OR 3/4" THICK EXTERIOR GRADE PLYWOOD (TAKES A 3' X 6' PIECE)
SAW:
HAND-HELD SABRE SAW
PAINTS:
BLACK EXTERIOR SEMI-GLOSS ENAMEL
to save paper they put part of the pattern on top of the pattern, so you cannot just cut the pattern out without cutting the other half up. I am not happy with this . the other patterns you cut out and tape together, this one i have to buy tracing paper and hope it goes thru and i get the correct lines
Kathy,
Thank you for your review. None of our patterns are meant to be cut out as templates. They are designed to be used with carbon paper and traced onto the wood. It is not about saving paper, but the fact that most printers cannot print wider than 36' or 3 feet wide.
¡Gracias por suscribirte!
¡Este correo electrónico ha sido registrado!