Cannabis Adirondack Chair Plan

Your guests will all want to sit in the chair with the Marijuana leaf shaped back--it's sure to be a real conversation piece.

Leave the wood natural and apply an outdoor sealer for protection or paint the back a green color of your choice. Our full-size pattern includes complete step-by-step instructions and assembly diagrams that will practically ensure your success making this fun project. (31" wide X 39" tall)

A handy parts kit is also available (#W1845KIT) below that includes the bolts, nuts and washers to make one chair.

More Info

Hardware:
Nails - One box, 4d 1-1/2" long finish, galvanized.

Screws - Fifteen #8 x 1-1/4" long, galvanized.
Hardware Kit - W1845KIT       Screws: - Four #8 x 2-1/2" long, galvanized.
        Six #8 x 1-3/4" long, galvanized.
      Carriage Bolts - Four 1/4" dia. x 3" long, galvanized.
        Two 1/4" dia. x 2" long, galvanized.
      Washers - Six 1/4" I.D., galvanized.
      Nuts - Six 1/4", galvanized.

Tools: Hand held jigsaw (sabre saw) with a smooth cutting non-chipping scrolling blade, table saw, router and round over bit, drill and 3/16", 1/4"" and 3/4" dia. bits, screwdriver and 7/16" socket wrench.

Supplies: Transfer paper (#CARB2), pencil, clear tape & scissors.
Sand paper - medium & fine grits.
Wood filler - non shrinking, fast drying for wood flaws.
Wood Glue - Outdoor (#GLUETB3).
Paint brush - 2" wide brush.

Paint or Stain (optional): Outdoor Stain or water based primer (#PRIMQT) for a base coat and a outdoor paint of choice.

Sealer: High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.