Supplies

Add realism to your Projects!Note: Post backer clips for use with fabric not includedbut are available upon request at no extra charge. Sold in pairs except for 36mm 3D Green

Add realism to your Projects!Note: Post backer clips for use with fabric not includedbut are available upon request at no extra charge. Sold in pairs except for 36mm 3D Green

*Can MIX 'N' MATCH 3 or more any type Jig Blade Packs!!The smoothest cutting blades available! Long lasting "BLACK JACK" U-shank Upward Cutting Jig (Sabre) Saw blades easily cuts through 2x4's. (Size: 3-15/16" x 5/16" x .05) (10 Teeth Per Inch) Add items to...

Convenient Hardware kit for our Gas Pump project #W1668 shown below. Includes 6' cord with plug, threaded steel rod, (3) brass hex locknuts, 7.5 watt steady burning blub, socket plus one pair of medium duty black hinges with screws for the door. [This Kit...

Premium, water-based, non-toxic craft paint known for its rich, creamy consistency and excellent, often one-coat coverage. It dries to a durable, smooth matte finish on porous surfaces like wood, terra cotta, plaster, and paper mache, making it ideal for decorative painting, stenciling, and general...

Permanent, weather-resistant acrylic paint for outdoor decorating on concrete, wood, and terra cotta.  No sealing needed.  Will not crack or peel. 2 oz. Bottles

Add realism to your Projects!Note: Post backer clips for use with fabric not includedbut are available upon request at no extra charge. Sold in pairs except for 36mm 3D Green

Add realism to your Projects!Note: Post backer clips for use with fabric not includedbut are available upon request at no extra charge. Sold in pairs except for 36mm 3D Green

Set of 3More InfoNo More Information Available

Hammer these tough and durable plastic tent stakes into the ground then rope or wire to your projects to secure them from tipping over in the wind. (Most effective when driven into the ground at an angle, 12 inches long)

Includes everything you'll need to light our Air Meter project--6' lamp cord with plug, 6" threaded steel rod, (3) brass hex locknuts, 7.5 watt steady burning bulb and socket. More Info

Formerly Avalon by Delta, it has been replaced with FolkArt's Skyline #2499

1/4" x 8" x 24"

Add realism to your Projects!Note: Post backer clips for use with fabric not includedbut are available upon request at no extra charge. Sold in pairs except for 36mm 3D Green

Add realism to your Projects!Note: Post backer clips for use with fabric not includedbut are available upon request at no extra charge. Sold in pairs except for 36mm 3D Green

Add realism to your Projects!Note: Post backer clips for use with fabric not includedbut are available upon request at no extra charge. Sold in pairs except for 36mm 3D Green

Add realism to your Projects!Note: Post backer clips for use with fabric not includedbut are available upon request at no extra charge. Sold in pairs except for 36mm 3D Green

Enough 3/8" diameter white fiberglass rods to cut 66 pegs to make our KLINKO Game.

Contains 2 Colonial Style "H" Hinges with matching screws in a Black hammered finish for a country look. 1 1/4" Wide X 2 9/16" Long. Inset for flush doors, etc.More InfoNo More Information Available

Authentic indoor/outdoor vinyl decals give your gas pump project a realistic look. Kit includes the two 12" licensed Texaco decals (one for the front of the globe and one for the front of the cabinet) and the two 6" x 7" Leaded Gas decals...

Permanent, weather-resistant acrylic paint for outdoor decorating on concrete, wood, and terra cotta.  No sealing needed.  Will not crack or peel. 2 oz. Bottles

Add realism to your Projects!Note: Post backer clips for use with fabric not includedbut are available upon request at no extra charge. Sold in pairs except for 36mm 3D Green

Paint perfect quick drying lines and color small areas without the mess of a brush.

Make truly unique projects from wood pallets! Lumber prices are soaring yet millions of pounds of perfectly usable wood pallets are either burned or dumped in landfills every year. Wood Pallet Projects shows you how to turn this essentially free wood source into some...

Contains 2 colonial "T" style hinges with matching screws in a black hammered finsih for a Country Look. 6-1/2" Long X 3-1/4" Wide. Inset for flush doors, etc. More InfoNo More Information Available

Includes the specialty hardware to make three weathervanes. [This Kit was developed for our Winfield Collection project--instructions for its use are included on the pattern only.]

Includes four glider hangers (YFHGR) and one hardware kit (YF36KIT2). The Pattern is sold separately and you will also need 2 packages of our 3/8" birch plugs (PLG375). [This Kit is developed for a Winfield Collection project--instructions for its use are included on the...

Includes the hard-to-cut blade hub along with the steel center shaft & spinning sleeve, stainless steel support rod, brass sleeve & bearing along with two wood half balls. The Blade and Tail Plywood is not included. [This Kit was developed for our Winfield Collection...

1/8" x 8" x 24"

1/2" x 4" x 24"

1/2" x 8" x 12"

THIS IS A HARDWARE KIT FOR THE PORCH SWING - #YF17.  KIT CONTAINS Galvanized & zinc parts: 21- #6 X 1 1/4" LONG FLAT HEAD SCREWS28- #8 X 2 1/2" LONG FLAT HEAD SCREWS8- #8 X 3" LONG FLAT HEAD SCREWS2- 1 1/4" SHANK,...

Airbrushing Woodcrafts BookThe Airbrushing Woodcrafts Book is an essential resource for anyone looking to enhance their woodworking projects with airbrush techniques. This comprehensive guide includes step-by-step instructions, detailed illustrations, and expert tips designed to help both beginners and seasoned woodworkers master the art of...

Flickering Candle Kit includes plug-in candle complete with outdoor rated socket, cord and plug, candle sleeve, flicker bulb and candle cup. More Info

All the specialty hardware to make one Halloween Ferris Wheel in a convenient money-saving kit. Includes center shaft bearings, steel rods, clamps, lag screws and PVC sleeves. [This Kit was developed for our Winfield Collection project--instructions for its use are included on the pattern...

Our winning collection of popular north American butterflies as colorful whirligigs? They truly take wing in your yard! Parts required: kit (6) H-660. Largest is 2H x 7W x 8D. 6 designs!More Info

1/8" x 8" x 24"

1/4" x 4" x 24"

Add realism to your Projects!Note: Post backer clips for use with fabric not includedbut are available upon request at no extra charge. Sold in pairs except for 36mm 3D Green

Keep your projects turning smoothly with our quality lazy susan ball bearing turn tables.

Economically priced brass plated hinges. Sold as packs of 4 hinges with 16 screws. Size in product title. (#BHNG13 is Solid Brass)

Quality turned and sanded wooden ball.

Quality turned and sanded wooden ball.

Color replacement for Delta Deep Sea Coral and P2671 Sunkissed Coral

Hardware kit includes the screws, carriage bolts, washers and lock nuts needed to complete one Chaise Lounge Rocker (#YF32). [This Kit is developed for a Winfield Collection project--instructions for its use are included on the pattern only.] More Info

Parts Kit includes all the bolts, nuts, washers and screws plus a piece of extra strong 3/4" thick plywood to use to cut out the krusher "jaws". Remaining wood and project plans are not included.[This Kit is developed for a Winfield Collection project--instructions for...

Convenient Hardware Kit to make our Dancing Snowman #W2125 available below. Includes all the specialty plastic bushings, nuts, washers and screws to make one project. [Please Note that this Kit was developed for a specific Winfield Collection project--instructions for its use are included on...

**This item has been discontinued and replaced with P2424-BAMBI For informational purposes.  If this is added to cart, nothing will be sent.

1/2" x 8" x 24"

Add realism to your Projects!Note: Post backer clips for use with fabric not includedbut are available upon request at no extra charge. Sold in pairs except for 36mm 3D Green