To Order by Phone: 800.946.3435

Includes full-size patterns to make three sizes: 40", 30" and 23" tall
WOOD:
One 4' x 8' sheet of Plywood (3/4" thick exterior grade, good one or two sides, preferably 5-ply for better stability).
PARTS/HARDWARE: Required for displaying.
Stakes - Two 3/8" dia. x 18" long, fiberglass (2 - #YS18).
Four 3/16" dia. x 11" long, Steel (4 - #YS11).
Clamps - Four 3/8" w/screws (1 pack - #YSC2).
Eight 3/16" w/screws (1 pack - #YSC1).
TOOLS:
Hand held jigsaw (sabre saw) with a non-chipping, scrolling blade.
SUPPLIES:
Transfer paper (#CARB), pencil & clear tape.
Sand paper - medium & fine grits.
Paint brushes - 2" wide brush.
PAINT:
Water based primer (#PRIMQT) for a base coat and the following suggested colors of acrylic paint or exterior semigloss enamel: Black (#2506).
SEALER (optional):
High-grade, non yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.
I like the Velociraptor patterns but the way the rear legs are laid out with the little piece of leg u have to attach a ground spike sucks. I u live anywhere with wind down they go. I reworked a leg to have a 42" spike to hold it up. I live in Florida. Pattern on feet need to be modified
Very nice pattern, easy assembly and proudly displayed in my yard next to bigfoot
Thanks for subscribing!
This email has been registered!