Customer Service: 800.946.3435

Don't let the size intimidate you though---this project is actually quite easy to make. The entire display shown can be cut from just a single sheet of plywood using a hand-held jigsaw.
And you'll get started quickly because our Premium 4'x8' pattern has every full-size piece precisely laid out, ready to trace. Of course, step-by-step instructions are always included to ensure your success.
Display measures over 10' tall (122")!
TOOLS:
Hand held jigsaw (sabre saw) with a non-chipping, scrolling blade, drill and 3/16" and 3/8" dia bits, hack saw, large hammer, two pipe wrenches and screwwdriver.
(1-3/8" dia. drill bit also needed if using optional base.
HARDWARE:
Black Steel Pipe - 1" I.D. x 10" long, threaded ends
Coupling Fitting - One 1", black malleable iron.
Screws - Twenty three #8 x 1-1/2" long
Eight #12 x 3/4" long pan head
SUPPLIES:
Transfer paper (#CARB), pencil & clear tape.
Sand paper - medium & fine grits.
Wood Glue - exterior (#GLUETB3) Wood filler - non shrinking, fast drying for wood flaws.
Paint brushes - 2", 1" and fine detail.
PAINT:
White water base primer (#PRIMQT) for a base coat and the following suggested colors of Delta Craft paint:
2002-Antique Gold
2037-Blue Heaven
2038-Ultra Blue
2084-Lisa Pink
2091-G.P. Purple
2449-Hydrangea Pink
2451-Tropic Bay
2459-Crocus Yellow
2477-Denim
2505-White
2506-Black
SEALER: High-Grade, Non-Yellowing, Semi-Gloss, UV Protected Project Sealer (#POLYQT) for Exterior use.
Thanks for subscribing!
This email has been registered!