Fat Dog Banks Woodcraft Pattern

These fun projects are easy to make from layers of standard wood following the step-by-step instructions included on our full-size pattern. Each bank uses one acrylic oval (#PLEX5), one bank plug (#PLUG) and brass screws (#BS100). Click on "More Info" for a complete parts required list.

Banks measure up to 13" tall x 11" wide.

More Info

WOOD:
One - 2X12 x 60" long board, #2 or better grade pine.
One - 1X4 x 36" long board, #2 or better grade pine.
One - 12" x 12" x 1/4" thick piece of Finnish plywood (#FPLY412).

HARDWARE/MATERIALS:
Screws - Eight #4 x 1/2" long brass, round head (1 pack of #BS100).
Rubber Hole Plug - Two 1-1/4" dia. (#PLUG).
Acrylic Oval - Two 4-1/2" x 6" x 3/32" thick (#PLEX5).

TOOLS:
Hand held sabre saw (jig saw), table saw, band saw or scroll
saw with a smooth cutting non-chipping blade, drill, 1-1/4" dia. drill bits and a screw driver.

SUPPLIES:
Pattern transfer paper (#CARB), pencil & clear tape.
Sand paper - medium & fine grits.
Wood filler - non shrinking, fast drying for wood flaws.
Paint brushes - 2", 3/4", 1/4" and fine tip detail brushes.
Wood glue-exterior (#GLUETB3).

SEALER:
High-grade, non-yellowing, semi-gloss project sealer (#INDRQT) for indoor protection.

PAINT:
2030-Burnt Sienna
2049-Spice Brown
2085-Natural Beige
2411-Raw Sienna
2505-White
2506-Black