Crazy Spinner 1 Wood Pattern

This large and crazy layered spinning project is just plain fun to watch!! This colorful design has three layers that spin independently in the wind with the middle layer spinning in the opposite direction. (44" in diameter)

You may also want to purchase our Crazy Spinner Parts Kit, WGKIT11, which includes the hard to find parts needed to make one spinner.

Project also requires 13 fiberglass yard stakes #YS18 and 1 pkg of clamps #YSC2 (not included in Spinner Parts Kit).

More Info

Dimensions: 44" dia.

Wood:
two 22" x 44" x 1/8" thick pieces Luan plywood
one 61" long 2X4 pine board
one 36" long 1X4 pine board

Tools:
table saw or bandsaw with a smooth cutting, non-chipping blade
electric drill and 1/2", 3/8", 3/16" dia. drill bits
screwdriver

Winfield Hardware:
Thirteen 3/8" dia. x 18" long fiberglass yard stakes (#YS18)
four 3/8" yard stake clamps with screws (#YSC2)
Hardware kit - WGKIT11

Supplies:
transfer paper (#CARB)
sandpaper-medium & fine grits
wood filler-non shrinking, fast drying for wood flaws
glue-wood working outdoor
glue-2 part epoxy-slow dry
grease-white lithium

Paint:
White water base primer (#PRIMQT) for a base coat;
PP06-sunshine yellow
PP21-wrought iron black
PP25-citrus green
PP29-petunia purple
PP41-carnation pink
PP44-pansy purple
PP52-pumpkin
PP55-robin's egg blue
PP63-blue bahama
PP64-raspberry red

Sealer: high-grade, non-yellowing, semi-gloss UV protected project sealer for outdoor protection (#POLYQT)