GIGANTIC Uncle Sam Pattern

WOOD:
One 4X8 x 3/4" thick sheet of exterior plywood (sanded 2 sides).
Optional Plywood Base - One 30" x 40" x 3/4" thick piece.
Optional Closure Plate - One 4" x 8" x 3/4" thick piece.
TOOLS:
Hand held jigsaw (sabre saw) with a non-chipping, scrolling blade,
drill and 3/16" and 3/8" dia. drill bits, hack saw, large hammer,
two pipe wrenches and screwdriver.
(1-3/8" dia. drill bit also needed if using optional Base).

HARDWARE:
Carriage Bolts - Four 3/8" x 2" long, plated.
Flat Washers - Four 3/8" I.D., plated.
Fender Washers - Four 3/8" I.D., plated.
Nuts - Four 3/8", zinc plated.
Pipe Clamps - Six for 1" dia. pipe.
Black Steel Pipe - 1" I.D. x 10' long, threaded ends.
Coupling Fitting - One 1", black malleable iron.
Screws - Eight #8 x 1-1/2" long (Eight more for optional Base).
Twelve #12 x 3/4" long, pan head.
USA Flag Kit - 3'x5' with 6' pole.

SUPPLIES:
Transfer paper (#CARB3), pencil & clear tape.
Sand paper - medium & fine grits.
Wood Glue - exterior (#GLUETB3).
Wood filler - non shrinking, fast drying for wood flaws.
Paint brushes - 2", 1" and fine detail.

PAINT:
2002-Antique Gold
2019-Rosy Beige
2038-Ultra Blue
2044-Coral
2057-Quaker Grey
2076-Crimson
2436-Charcoal
2484-Black Cherry
2505-White
2506-Black

SEALER:
High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.