Attractive two person picnic table. Makes a nice weekend project.
Table top– 35"
Weather resistant Cedar. If you don't need weather resistant wood for your project use a lower cost #2 grade pine.
Three 2X6 x 10' long board
Four 2X4 x 10' long boards
One 2X6 x 8' long board
One 4X4 x 6' long board
Hardware: Required for either table.
(* = Available as part of kit #YF19KIT)
* One Hundred Sixteen #8 x 2-1/2" long flat head, weather resistant
* Eighty Two #10 x 3" long, flat head weather resistant
* Lag Screw– Eight 5/16" dia. x 3" long
* Washer – Eight 1" O.D. x 5/16" I.D.
Table saw or circular saw
Drill bits – 3/16", 5/16" and 7/16" dia.
Transfer paper (#CARB)
Pencil and clear tape
Sand paper – Medium and fine grits
Wood Filler – Non-shrinking, fast drying for wood flaws (#WF8)
Paint brushes – 3/4" and 1/4" wide brushes
Wood Glue – waterproof, exterior grade
High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.
NOTE: Not recommended to be used by persons weighing in excess of 250 lbs. each.