Dimensions: (3) designs; up to 26" dia
Wood: One 36" x 48" piece of plywood (1/2" or 3/4" thick exterior grade, good one or two sides, preferably 5-ply for better stability).
Parts/Hardware:
Plastic Eyes - Six Amber 24mm (6 - #PE136).
Stakes - Six 3/16" dia. x 11" long, steel rods (6 - #YS11).
Clamps - Twelve 3/16" w/screws (1 pack of #YSC1).Tools:
hand held sabre saw with a smooth cutting non-chipping, scrolling blade
screwdriver
Tools:
Hand held jigsaw (sabre saw) with a non-chipping, scrolling blade
electric drill, drill bit and screwdriver.
Supplies:
Transfer paper (#CARB3), pencil & clear tape.
Sand paper - medium & fine grits.
Wood filler - non shrinking, fast drying for wood flaws.
Paint brushes - 1/4", 3/4" and 2" wide brushes and a fine tipped detail brush.
Paint:
white water base primer for a base coat (#PRIMQT)
2042-Pumpkin
2078-Straw
2401-Light Ivory
2436-Charcoal
2459-Crocus Yellow
2471-Hunter Green
2505-White
2506-Black
Sealer: high-grade, non-yellowing,semi-gloss UV protected project sealer for outdoor protection (#POLYQT)
