Wood: One 48" x96" piece of plywood (3/4" thick exterior grade, good one or two sides, preferably 5-ply for better stability).
One 1X6 x 96" long piece of Pine board.
Hardware: Required for assembly.
Screws - Thirteen #6 x 1-1/4" long, flat head.
Stakes - Two 3/8" dia. x 18" long, steel rods (2 - #YS18).
Clamps - Four 3/8" w/screws (1 pack of #YSC2).
Nails - 1 box, 1-1/4" long
Tools: Table Saw and Hand held jigsaw (sabre saw), with a non-chipping, scrolling blade, electric drill, 5/32" dia. drill bit and screwdriver.
Supplies: Transfer paper (#CARB2), pencil & clear tape.
Sand paper - medium & fine grits.
Wood filler - non shrinking, fast drying for wood flaws.
Paint brushes - 2", 3/4" & 1/4" wide brushes and a fine tipped detail brush.
Wood Stain - suitable brown color of your choice.
Paint: Water based primer (#PRIMQT) for a base coat and the following colors of Delta acrylic paints:
2049 - Spice Brown
2083 - Fire Red
2436 - Charcoal
2449 - Hydrangea Pink
2459 - Dolphin
2484 - Crocus Yellow
2484 - Black Cherry
2505 - White
2506 - Black
2603 - Silver
Sealer: High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.