Life-Size Nativity Color Posters and Stable Pattern Set

It's easy using our high quality Color Posters. Just apply our adhesive backed Color Posters onto your properly prepared plywood cutouts following our simple instructions. (Pattern cut lines are included on each Color Poster.) No detail painting means you'll save countless hours on each life-size piece in this set.

Our Color Posters are made of high quality, self-adhesive outdoor vinyl (the same material used on billboards) and are printed in vivid color with a gloss finish using UV resistant inks. Color Posters are shipped rolled for easier application and to eliminate unsightly fold creases in your finished projects. Most of our Color Posters are printed on demand so please allow up to 3 days extra for printing and drying time. .

This set includes one-piece Color Posters with instructions to make all the life-size Nativity figures shown plus a full-size pattern with instructions to make our slide-together plywood Stable.

Carbon Transfer Paper is required to trace cut lines from the Poster onto your plywood and our Color Poster Edge Sealer is required to protect the Poster edges. Both are available below.

Cautionary Notes:
1) DO NOT USE OUR PAPER PATTERNS---These posters will not fit onto the corresponding figures cut from our life-size Nativity woodcraft patterns. Plywood figures for this set must be cut out using the pattern lines provided on each poster.
2) PLYWOOD GRADE AND PREPARATION (painting and sanding) of the plywood cutouts as explained on the included instruction sheet and as reproduced on our website (click on Color Posters/Written Instructions on the left side of our home page) must be strictly followed to ensure optimum adhesion of your posters.

More Info

CP-NATC3C INCLUDES POSTERS:
CP-NAT9 - HOLY FAMILY, STAR, & THE PATTERN FOR THE STABLE
CP-NAT10 - SHEPHERDS & SHEEP
CP-NAT11 - THREE KINGS
CP-NAT13 - DONKEY & COW
CP-NAT14 - CAMEL
CP-NAT15 - ANGEL & DRUMMER BOY

PLYWOOD REQUIREMENTS FOR FULL NATIVITY SET:
8 SHEETS OF 3/4" THICK FOR CHARACTERS
(MDO Recommended---Marine, AAX, ABX, BBX and BCX grade plywood may be used but more sanding will be required)

2 SHEETS OF 1/2" THICK FOR THE STABLE
(MDO, Marine, BBX or BCX grades may be used)