Patterns Only

DISCRIPTION GREEN BAY HELMET  11-7/8 TALL X 15-1/4 WIDE  USE HARD WOOD OF YOUR CHOICE  

DISCRIPTION ILLINOIS HELMET  11-7/8 TALL X 15-1/4 WIDE  USE HARD WOOD OF YOUR CHOICE  

DISCRIPTION INDIANA HELMET  11-7/8 TALL X 15-1/4 WIDE  USE HARD WOOD OF YOUR CHOICE  

DESCRIPTION    PHEASANT INTARSIA DIMENSIONS    27" X 21-3/4" More Info WOOD    3/4" THICK HARDWOOD OF YOUR CHOICE WITH ALOT OF CONTRAST SINCE THIS    PROJECT REQUIRES SEVERAL DIFFERENT SHADES OF WOOD. YOU MAY USE STAIN    TO OBTAIN THE DIFFERENT SHADES.  HOWEVER,...

DESCRIPTION:    2 CLEVER BIRDFEEDER PROJECTS - A CRAFTY CAT AND A SILLY SQUIRREL DIMENSIONS:    SQUIRREL FEEDER - APROX. 28 " TALL        (SQUIRREL IS 10-1/2" X 14-1/2")    CAT FEEDER - APPROX. 30" TALL        (CAT IS 10-1/2"...

DESCRIPTION:    HOLIDAY TRAFFIC SIGNS    (ELF HOLDING UP ANY ONE OF FOUR SIGNS) DIMENSIONS:    ELF - 23" TALL X 8-1/4 WIDE    STOP SIGN IS 11" 11" - ALL OTHER SIGNS APPROXIMATELY THIS SIZE More Info WOOD:    #2 OR BETTER GRADE...

From our classic Scroller line, the only available images and descriptions are from old catalogs.

From our classic Scroller line, the only available images and descriptions are from old catalogs.

From our classic Scroller line, the only available images and descriptions are from old catalogs.

From our classic Scroller line, the only available images and descriptions are from old catalogs.

DESCRIPTION:    USE TO TRACE PAINT LINES ONTO DARK BACKGROUNDS. GRAPHITE IS     ERASABLE & GIVES A LIGHT LINE TO PAINT OVER. DIMENSIONS:    8 SHEETS 18" X 24"  

DESCRIPTION:    USE TO TRACE PAINT LINES ONTO DARK BACKGROUNDS. GRAPHITE IS     ERASABLE & GIVES A LIGHT LINE TO PAINT OVER. DIMENSIONS:    4 SHEETS 18" X 24"  

Place our special formula Graphite Paper on your wood, ink side down, then lay your Winfield pattern on top. Trace the pattern lines with a stylus or a ballpoint pen. Peek before moving the pattern to ensure all lines have been transferred to the...

These waterbased non-toxic paints can be used on light or dark colored fabrics, leather, paper, wood, clay or canvas. Meets ASTM D-426 Standards 2 oz BottleMore InfoNo More Information Available

30 Incredible Bird Intarsia Patterns--a $300 Value if Purchased Separately! Renowned wildlife sculptor/designer, Kathy Wise, delivers what may be her best collection of Intarsia work yet.....30 beautiful realistic-looking projects, from a flying Osprey to a pair of Bobwhites, plus vivid color photos, clearly explained...

This project is sure to get compliments--it looks like beautiful stained glass, but you make it easily and inexpensively from just plexiglas and special glass paints. Full-size pattern explains everything. (23" dia.) More InfoDESCRIPTIONLARGE PAINTED GLASS SUNCATCHERDIMENSIONS23" DIA.WOOD1X8 X 48" LONG OAK BOARDSAWHAND HELD...

This project looks like beautiful stained glass, but you make it easily and inexpensively from just plexiglas and special glass paints. Full-size pattern explains everything. (23" dia.) More InfoDESCRIPTIONHANG THIS GORGEOUS DESIGN IN YOUR WINDOW OR ON YOUR WALL - IT'S SURE TO BE...

This project looks like beautiful stained glass, but you make it easily and inexpensively from just plexiglas and special glass paints. Full-size pattern explains everything. (23" dia.) More InfoDESCRIPTIONHANG THIS GORGEOUS DESIGN IN YOUR WINDOW OR ON YOUR WALL - IT'S SURE TO BE...

Includes all the needed specialty hardware to make oneLighthouse (#LITE) available below. (Does Not include the plexiglass.) [This Kit was developed for our Winfield Collection project--instructions for its use are included on the pattern only.]

6' long white 18 gauge cord with candelabra socket and on/off switch. U.L. Listed and CSA Approved, features metal-lined pop-in socket that is 1" diameter x 1" high, two prong plug and includes a clear 4 watt bulb. More Info

Make a fun statement! Add some holiday cheer! This unique car magnet with its colorful airbrushed look will surely be noticed wherever you drive! Made from quality outdoor UV & fade resistant materials. Over 7" long. More Info

Make a fun statement! Add some holiday cheer! This unique car magnet with its colorful airbrushed look will surely be noticed wherever you drive! Made from quality outdoor UV & fade resistant materials. Over 7" long.

Make a fun statement! Add some spooky holiday fun! This unique car magnet with its colorful airbrushed look will surely be noticed wherever you drive! Made from quality outdoor UV & fade resistant materials. Over 7" long.

[No Product Description]More Info

[No Product Description]More Info

48 sparkling acrylic jewels, 5 sizes.More Info

At last, a video that takes the mystery out of the antique art form of Intarsia and shows you in an easy-to-follow, step-by-step fashion how to turn scrap pieces of wood into your very own exquisite works of art! Everything is covered - wood...

Hang pictures, scroll saw art and shelves securely onto the wall. 10 pack of plates with 20 screws.

This kit includes all the 1/4" Dia. X 2-1/4" carriage bolts, nuts, washers and exterior wood screws needed to make one Love Seat Glider. [This Kit was developed for our Winfield Collection project--instructions for its use are included on the pattern only.] More Info

This kit includes four glider hangers (#YFHGR) and one hardware kit (#YF14KIT) for the Love Seat Glider. The Pattern and the 2 packages of birch plugs (#PLG375) are sold separately. [This Kit was developed for our Winfield Collection project--instructions for its use are included...

Includes wood parts for the fancy top plus ground stakes for our Gabled Lattice project shown below. [This Kit was developed for our Winfield Collection project--instructions for its use are included on the pattern only.] More Info

Includes all the turned wood parts, plastic animal eyes and craft gem stones required to make our Patio Paver Pal Nativity Set. Pattern, Wood to cut parts from, paint, glue and other accessories are not included and must be purchased separately. More Info

Includes the hard-to-cut blade hub along with the steel center shaft & spinning sleeve, stainless steel support rod, brass sleeve & bearing along with two wood half balls. The Blade and Tail Plywood is not included. [This Kit was developed for our Winfield Collection...

Authentic indoor/outdoor vinyl decal gives your project a realistic look. (12" Diameter) Click here for decal application instructions. More Info

Authentic indoor/outdoor vinyl decal gives your project a realistic look. (12" x 12") Click here for decal application instructions. More Info

Two Very Popular Shadows in a Special Money-Saving Pattern Set! You'll turn some heads when you display both of these leaning life-size projects in your yard! Easy to make from plywood using just a hand held jigsaw. You get traceable, full-size patterns plus complete...

Convenient Light Kit for use with our Marquee Sign Projects. Includes 25 long-life (3000 hour) G40 large clear glass bulbs (golf ball size, 1.5" wide) plus 25 feet long C7 black 20ga. stringer wire with sockets at 12" spacing, female plug and 5 amp...

Two Very Popular Shadows in a Special Cost-Saving Pattern Set! You'll turn some heads when you display both of these leaning life-size projects in your yard! Easy to make from plywood using just a hand held jigsaw. You get traceable, full-size patterns plus complete...

Set of four 3/8" diameter x 2" long steel Leg Levelers, four hex nuts and four tee nuts. Easy to use....just drill and insert tee nuts into the bottom corners, screw in levelers and adjust to level most wood projects.

Steel zinc plated catch: each 1-1/4" x 4" Long with screws Two per package. More InfoNo More Information Available

This remote controlled battery operated LED Light Kit features 8 fun and flashy changeable light modes. Durable LED wire strand extends 16' in total length and has 50 warm LED lights. Requires three AA batteries (not included). Great for backlighting all types of holiday...

Enough 3/8" diameter white fiberglass rods to cut 66 pegs to make our KLINKO Game.

Convenient kit includes the 4" long bolt with self-locking nut, 3" long ringed Pin, four flat washers, two 3/8" dia. x 8-7/8" long fiberglass ground stakes, and eight brass plated screws with brass sleeves .More Info

This colorful Lady Bug Birdhouse Design is sure to get lots of attention wherever you display it! Hang this unique project from a tree limb using wire and an eye screw or mount on a fence or tree trunk using our Flush Mount Hangers...

Create Intarsia the "Wise" way! Author Kathy Wise brings 20 of her amazing animal pattern to life in this step-by-step guide thats filled with photos, patterns and intarsia hints/techniques for every level of woodworker. Over $200 worth of Intarsia patterns inside! (96 pages)

Aproximately 11" X 14"; Wood: 5/32" thick oak plywood, 1/8" thick plywood for backboard; Saw: Scroll saw; Parts Offered: #KPLY516#FPLY816; Skill Level: AdvancedMore InfoNo More Information Available

Make this display using our Finnish Plywood Panels, Maple Hardwood Boards and our LED Light Kit. Our Pattern includes step-by-step instructions from cutting to assembly and then adding the light feature. An eye-catching Christmas Project to brighten your mantel this Holiday Season. (15" wide...

4 motorcycle themed projects included in this pattern set -- a wall clock, napkin holder, desk bike, and tie rack.More InfoNo More Information Available

Durable battery operated 20 light LED wire strand extends 6' in total length. (Batteries Included!!)More Info

Cut Ornamental frame and scrolled artwork ALL FROM THE SAME BOARD using an easy table tilt method!! Adds depth to otherwise one dimensional, flat plaques. Stain or paint backer board a vivid color for the most dramatic effect. Each Frame-n-Art design includes patterns for...