Dimensions:
Over 10' tall – 4' x 8' body
Wood:
Five 4' x 8' sheets of 3/4"" thick exterior grade plywood, preferably 5-ply for better stability.
Hardware:
Carriage Bolts - Five 3/8" dia. x 2" long
Nuts - Five 3/8"
Washers - Five 3/8" I.D., flat
(Carriage Bolts, Nuts and Washers above available as Parts
Kit #W1448KIT to fasten neck)
Guy Wire - Two lengths of 16 gauge x 10 ft. long
Guy Wire Stakes - Two steel or plastic, heavy duty, 18" long
Tools:
Hand held jig saw (sabre saw) with a smooth cutting non-chipping scrolling blade
Screwdriver
Drill and a 3/8" and 1/4" dia. drill bits
Supplies:
Pattern transfer paper (#CARB2), pencil & clear tape
Sand paper-medium & fine grits
Wood Glue-exterior (#GLUETB3)
Wood filler-non shrinking, fast drying for wood flaws (#WF8)
Paint brush and roller
Paint:
Primer - White water based (#PRIMQT)
Exterior Latex Enamel: White.
Sealer:
(Optional if using Exterior Latex Enamel Paint.)
High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.