DESCRIPTION:
A cute bird feeder with kitties climbing up the sides.
DIMENSION:
Approx. 34" tall x 13" wide (width of the tray)
WOOD:
One 21" x 36" piece of 1/2" plywood, exterior grade
One 4X4 x minimum of 48" long
HARDWARE:
Screws – Six #8 (or #10) x 3/4" long flat head
Ten #8 (or #10) x 1-1/4" (or 1-1/2") long, flat head
TOOLS:
Hand held sabre saw or scroll saw with smooth cutting non-chipping blade
Drill and 3/16" drill bit
Screwdriver
SUPPLIES:
Transfer Paper (#CARB)
Pencil and clear tape
Sand paper – medium and fine grits
Wood filler – non-shrinking, fast drying for wood flaws
Paint brush – 3/4" and 1" wide and a fine tipped detail brush
Wood glue – exterior
PAINT:
White water based primer (#PRIMQT) for a base coat and the following colors of acrylic paint or exterior semi-gloss enamel:
2030-Burnt Sienna (Brick)
2051-Copen Blue (Blue)
2057-Quaker Grey (Grey)
2059-Blue Jay (Light Blue)
2093-Pigskin (Gold) ***discontinued*** replace with 2002-Antique Gold
2436-Charcoal
2464-Sachet (Rose) ***discontinued*** replace with 2469-Antique Rose
2485-Wild Rose (Dark Rose) ***discontinued*** replace with 2123-Burgundy
2505-White
2506-Black
SEALER:
High-grade, non-yellowing, semi-gloss UV protected project sealer for outdoor protection (#POLYQT)
