Description:
Tree Faces
Two different faces
Dimensions: 22" tall
Wood:
One 24" x 24" x 1/8" thick piece of plywood
One 1X10 x 48" long rough sawn cedar board
Hardwood Balls- Two 2-1/2 " dia. (#BAL25), one 1-1/4" dia. (#BAL125)
Hardware: Required for mounting
Keyhole Plates- Eight required with screws (#KEYH)
Tools:
Scroll saw, hand held sabre saw or band saw, with a smooth cutting non-chipping blade
Phillips screwdriver
Electric Drill
5/32" and countersink drill bits
(optional for shaping: router with 3/8" round over bits, wood files, bench top belt sander with medium grit belt)
Supplies:
Transfer paper (#CARB), pencil & clear tape
Sandpaper- Medium & Fine grits
Wood Filler-non shrinking, fast drying for wood flaws (#WF8)
Paint Brushes- 2", 3/4" & 1/4" wide and a fine tipped detail brush
Wood Glue-exterior (#GLUETB3)
Paint:
White water base primer (#PRIMQT) for a base coat
2090-Hippo Grey
2436-Charcoal
2505-White
2506-Black
Sealer:
High grade, non-yellowing, semi-gloss UV protected project sealer for outdoor protection (#POLYQT)
