Wood:
One 4x8 x 3/4" sheet of exterior Plywood.
One 3x4 x 3/4" piece of exterior Plywood
One 1x6 x 48" long Pine board
One 2x4 x 13-1/2" long Pine Board
One 3" x 3" x 1/4" piece of exterior Finnish Plywood (#FPLY412)
Hardware/Parts:
Screws - Two #8 x 1-1/2" long outdoor
Twelve #6 x 1/2" long, outdoor
Hinge - Two 2-5/8" x 4", outdoor (#BHNG15)
Nails - One box, 4D 1-3/8" long finish, galvanized
Tools: Table Saw and Hand held jigsaw (sabre saw), with a non-chipping, scrolling blade, table saw, router and round over bit, drill and 5/32" dia. bit, screwdriver.
Supplies: Transfer paper (#CARB2), pencil & clear tape.
Sand paper - medium & fine grits.
Wood filler - non shrinking, fast drying for wood flaws.
Paint brushes - 2", 3/4" & 1/4" wide brushes and a fine tipped detail brush.
Paint: Water based primer (#PRIMQT) for a base coat and the following colors of Delta acrylic paints:
2083 - Fire Red
2424 - Bambi
2436- Charcoal
2504- Yellow
2603 - Silver
2505 - White
2506 - Black
Sealer: High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.
