Bigfoot Adirondack Chair Pattern

Wood:
One 2X6 x 96" long Pine board.
One 2X10 x 96" long Pine board.
One 2X4 x 96" long Pine board.
Two 1X4 x 96" long Pine boards.
One 1X8 x 96" long Pine board.
One 1X10 x 48" long Pine board.
One 1X10 x 120" long Pine board.

HARDWARE/PARTS:
Screws - Twelve #8 x 2-1/2" long, outdoor.
Carriage Bolts - Six 1/4" dia. x 3" long, outdoor.
Washers - Six 1/4" I.D., outdoor.
Nuts - Six 1/4", outdoor.
Nails - One box, 4d 1-1/2" long finish, galvanized.
Plastic Eyes - Two 30mm Clear (#PE147).

TOOLS:
Hand held jigsaw (sabre saw) with a smooth cutting non-chipping scrolling blade,
table saw, router and round over bit, drill and 3/16", 1/4" and 3/4" dia. bits,
screwdriver and 7/16" socket wrench. )

SUPPLIES:
Transfer paper (#CARB2), pencil, clear tape & scissors.
Sand paper - medium & fine grits.
Wood filler - non shrinking, fast drying for wood flaws.
Wood Glue - Outdoor (#GLUETB3).
Paint brush - 2" wide brush.

STAIN (optional):
Outdoor Stain, dark brown.

SEALER:
High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.